Skip to content
Description
Infrared pairing function.
Watertight suitcase included.
Mono/Stereo mode switchable.
Headphone monitoring available.
Vivid High-contrast OLED display.
Built-in rechargeable Li-ion battery.
Detachable and 360°switchable antenna
Independent left and right channel outputs
Delivering professional broadcast-quality sound.
Low-cut function for low-frequency noise cancelling.
ON/OFF physical switches for group channel A and B.
Mic and Line input for multi-layered content creating.
The Saramonic UwMic9s wireless microphone system provides a premium 2-person wireless audio solution for Broadcast &TV,ENG,filmmakers,vloggers,mobile journalists and content creators for a remarkable price,It is an easy-to use,high-quality and flexible UHF system,The external input allows the receiver to be connected to a mic or line level device,such as a shotgun microphone,mixer,recorder or music player to capture additional sound or music.The system can be powered through its USB-C ports,allowing it to run for numerous hours on a USB-C 5V power bank.
RX9S Portable Receiver
The Saramonic UwMic9s RX is a camera-mountable dual-channel UHF wireless receiver.It features wide switching RF bandwidth,a high-contrast OLED display and infrared,synchronization between transmitter and receiver.The two detachable antennas can be rotated 360° for better reception.The receiver’s output can be toggled between mono and stereo modes,The low-cut function on the receiver minimizes low-frequency rumble.
Body-pack Transmitter TX9S
The Saramonic UwMic9S-TX9S is a mountable body-pack transmitter.It features an easy-to-read OLED display,a detachable antenna and built-in rechargeable batttery.with the line input and mic input jack,it can accept audio from the included 3.5mm locking lavalier mic or other line-level devices,A short press of the power button mutes the mic between takes.The locking function prevents the transmitter from being muted or turned off accidentally.
SPECIFICATIONS
Receiver RX9S
Channel number: 96
Frequency Response: A and B
Oscillator type: PLL synathesizer
Audio output connector: 3.5mm mini jacks(A and B channel output),
3.5mm headphone output
Audio input connector? 3.5mm mini jack(MIC IN/Line In jack)
Antenna: 1/4? wire antenna
Audio output level: -60 dBV
Headphone output level: 30mW(16?)
Receive frequencies: 514MHz-596MHz
Receive sensitivity: -95dBm
Signal-to-noise ratio: 75dB or more
Reference deviation: ±5kHz(-60 dBV,1kHz input)
Frequency response: 40Hz to 18kHz(+/-3dB)
Distortion 0.2% or less
Spur suppression -60dB
Reference audio input level -60dBV(Mic input,0dB attenuation)
Built-in battery capacity 2000mA
Power Requirements Built-in Li-ion Battery or USB-C DC 5V
Continuous use time 8 hrs
Dimension 220×64×25mm
Weight 193g(6.8oz)
Operating temperature 0? to 50?
Storage temperature -20? to +55?
Transmitter TX9s
Channel number: 96
Frequency Response: A and B
Oscillator type: PLL synathesizer
Carrier frequencies? 514MHz-596MHz
Reference deviation? ±5kHz(-60 dBV,1kHz input)
Signal to noise ratio? 75dB or more
Spur suppression -60dB
Voice delay 12ms
Antenna 1/4? wire antenna
Audio input connector 3.5mm mini jacks(MIC IN and LINE IN jack)
Reference audio input level -60dBV(MIC input,0dB attenuation)
Distortion 0.2% or less
Built-in battery capacity 2000mA
Power Requirements Built-In Li-ion Battery or USB-C DC 5V
Continuous time 8hrs
Dimensions 220*64*25mm
Weight 157g(5.5 .oz)
Operating temperature 0? to 50?
Storage temperature -20? to +55?